The application of video industrial videoscope in casting industry and the use method of video videoscope

As a high-tech inspection method, video industrial videoscope is gradually being widely used in the casting industry. It can observe, record and measure the internal details of objects, and perform non-destructive inspection on the inside of castings to ensure the quality and integrity of castings.

In the foundry industry, casting defects have become one of the bottlenecks restricting the development of the foundry industry. Traditional detection methods cannot detect internal problems in a timely and accurate manner, but video industrial endoscopes can quickly and accurately discover defects, looseness, bubbles, etc. inside castings through real-time monitoring, measurement and image analysis, and can timely Take steps to repair or replace.

The following steps need to be paid attention to when using video industrial videoscope:

1. Preparatory work: First of all, it is necessary to understand the characteristics of the object to be inspected and the types of defects that may exist, and select appropriate probes and inspection methods.

2. Install the probe: select the probe according to the characteristics of the object to be detected and the location of the defect, and install it at the front end of the endoscope. Note that the probe should be inserted into the center of the detected object as far as possible to obtain the best detection effect.

3. Start the equipment: follow the start-up steps in the equipment manual, turn on the video endoscope, adjust the image clarity and brightness, and confirm that the equipment can work normally.

4. Perform detection: Insert the probe into the object to be detected, and observe the internal situation through the display screen at the same time for real-time monitoring. The measurement function equipped with the endoscope can be used to measure and analyze the inspected object.

5. Organize data: After the test is completed, the data needs to be organized and saved for subsequent analysis or reference. Note that data accuracy and confidentiality must be ensured during data processing.

6. Maintain equipment: After the inspection is completed, the equipment needs to be cleaned and maintained to ensure that the equipment is in good condition when it is used next time. At the same time, it is necessary to pay attention to the storage method of the probe to avoid damage.

Generally speaking, the video industrial videoscope has a very broad application prospect in the casting industry, and it has become an indispensable inspection equipment in the foundry industry. Through this technology, we can greatly improve product quality and production efficiency, reduce production costs and safety risks.